| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support/ Offline Service |
| Power Supply: | 380V 50Hz |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The series of cold and thermal shock test chambers is divided into high and low-temperature zones and normal-temperature zones High temperatures could reach 180 degrees and low temperatures could reach negative 70 degrees. It is used to simulate product application scenarios in rapidly changing temperature environments. Evaluate the performance and reliability of the product under extreme temperature changes by alternating between high and low-temperature zones.
The three-box hot and cold(Thermal)shock test chamber is a necessary testing equipment for the metal, plastic, rubber, electronics, and other material industries. It is used to test the material structure or composite materials that can withstand the continuous environment of extremely high and extremely low temperatures in an instant. To such an extent, the chemical changes or physical damage caused by the thermal expansion and contraction of the sample can be detected in a short time.
Thermal Shock Test Chamber / Environmental test chamber
| Model | CTS-49L-3-CP | CTS-80L-3-CP | CTS-150L-3-CP | CTS-216L-3-CP | CTS-512L-3-CP | CTS-1000L-3-CP | |
| Chamber design | |||||||
| Volume | L | 49 | 80 | 150 | 216 | 512 | 1000 |
| Inner Size (cm) | W | 40 | 50 | 50 | 60 | 80 | 100 |
| H | 35 | 40 | 60 | 60 | 80 | 100 | |
| D | 35 | 40 | 50 | 60 | 80 | 100 | |
| Outer Size (cm) | W | 128 | 135 | 145 | 145 | 165 | 200 |
| H | 190 | 195 | 202 | 208 | 218 | 245 | |
| D | 170 | 178 | 188 | 195 | 210 | 250 | |
| Temperature test parameters | |||||||
| Temperature range | -70ºC - +180ºC | ||||||
| Temperature shock range - High temperature | +60ºC - +150ºC | ||||||
| Temperature shock range - Low temperature | -65ºC - -10ºC | ||||||
| Heating rate - Hot chamber | Normal temperature → +180ºC ≤30min | ||||||
| Cooling rate - Cold chamber | Normal temperature → -70ºC ≤60min | ||||||
| Shock test method | Three horizontal chambers | ||||||
| Transform method | Wind door switching mode | ||||||
| Temperature fluctuation | ºC | ±0.5 | ±0.5 | ±0.5 | ±0.5 | ±0.5 | ±0.5 |
| Temperature accuracy | ºC | 2.0 ºC | |||||
| Transform time | seconds | Temperature transformation time≤300s | |||||
| Equipment schematic diagram | |
||||||
| Power supply and connections (based on actual configuration in use) | |||||||
| Power Supply | AC380V 50HZ | ||||||
| Max.current | A | 36.5 | 42.5 | 53.2 | 65.3 | 100.3 | 114 |
| Max.power | KW | 24 | 28 | 35 | 43 | 66 | 75 |
| Control method | PID+SSR | ||||||
| Temperature/humidity (use ambient) | A : air cooling(enviromental temperature:5ºC-28ºC) W : water cooling(water temperature 10 ºC-28ºC,water pressure:0.25-0.4Mpa) |
||||||
| System components | |||||||
| Raw material | Shell material | Electrolytic board baking paint | |||||
| Chamber material | Stainless steel plate SUS#304 | ||||||
| Thermal insulation material | High-density polyurethane foam (+rock wool) | ||||||
| refrigeration system | Cooling method | (Air cooling / Water cooling) | |||||
| Compressor | Wheel Vortex Compressor (COPELAND) / Semi Enclosed Compressor (Bitzers) | ||||||
| Refrigerant | High-temperature machine:R404A(The ozone depletion index is 0); Low-temperature machine:R23(The ozone depletion index is 0) |
||||||
| Heating system | Nickel chromium wire heater | ||||||
| Circulating fan | High-temperature exposure: free; Low-temperature exposure: Off frequency type; Room-temperature exposure: centrifugal type |
||||||
| Observation window | Vacuum window; Electric heating (atuomatic adjustment), anti-forsting and anti-condensation device | ||||||
| Temperature sensor | Platinum electric resistance PT100 | ||||||
| Humidity sensor | Touch screen input + TFT colour LCD display | ||||||
| Noise | dB(A) | ≤75dB(A soumd level) | |||||
| Accessories | Two adjustable shelves ; Diameter 50mm test holes and rubber plugs; 4 Wheels; Horizontal support frame |
||||||
| Safety device | Overtemperature protection, compressor overpressure, overload protection, fan overload protection,leakage protection, etc |
||||||
Application
The Thermal Shock Test Chamber is used to test the bearing extent of material structures and composite materials in an instant and continuous high-temperature and extremely low-temperature environment, which in the shortest time to test their thermal expansion and contraction caused by chemical change or physical harm.
View more details, you can click product keywords....
| Hot Air Oven | Non-dust oven | Vacuum oven |
| Conveying drying machine | Temperature and humidity test chamber | Thermal shock test chamber |
| Mechanical accessories | Electronic accessories | Others |
Q: Are you trading company or manufacturer?
A: We are both manufacturer and trading company.
We have 20+ years' professional experience as an industrial drying equipment manufacturer. Our production factory covers area about 20000M2 and exports machines 1500+ sets per year.
Q: Is OEM or ODM service available?
A: Most of the products are available for OEM / ODM customization.
Q: How about your service ?
Pre-sales service:
24-hour online service for your consultation.
Help to choose the right model, as well as a series of services, personnel, suggestions.
Intermediate service:
Give you the best quotation with suitable & convenient payment terms and method.
Timely production and delivery, notify you in a timely manner.
After-sales service:
Technical training: equipment operation, daily maintenance and warranty, common fault diagnosis and troubleshooting
Regular tour service: discover problems in advance and eliminate equipment and human hidden dangers in time.
Technical guidance: additional valuable special services can be provided according to the needs of users.
Q: When will make delivery ?
A: Generally, the lead time for the stocked products is about 7~10 days, vary by models and production schedule. For those customized products, the manufacturing lead time is around 30~ 60 days.
Q: How about quality of the goods?
A: Since the establishment of our company, relying on the technology superiority, we aim at the domestic and international research & drying equipment market. We cooperate with a lot of big customers, such Panasonic, Threebond, Hisilicon, Gree, HUAWAEI etc. Welcome to our company and watch our plant production condition any time.
Q: Transportation
A: Transported by DHL, UPS, EMS, Fedex, Air freight, sea freight etc.
){kind=link}