Csail Model Sco-IR-4-2 Industrial Automatic Conveyor Drying Oven Industrial Tunnel Dryer Drying Machine

Product Description

Csail Model Sco-IR-4-2 Industrial Automatic Conveyor Drying Oven Industrial Tunnel Dryer Drying Machine
 

Product Description

Conveyor ovens, also called tunnel drying machines, move specimens through a heated chamber at a speed set by users. Belt speeds and temperatures are adjustable for consistent heating of a high volume of products.

The series of conveying drying machines is a continuous heating drying equipment. It is heated by IR tubes or IR panels and hot air circulation to achieve product drying.  The whole machine is divided into 4 sections, which are the feeding section, heating section, cooling section, and discharge section. It improves the production speed and production capacity through continuous baking and conveyor belt conveying. The machine could improve the production efficiency and automation level.

Humanized Design
1.Intelligent temperature controller.
2.Belt speeds and temperatures are adjustable for consistent heating of a high volume of products.
3.Professional foot design, saving lab space and improving the use efficiency.
4.Energy-saving design,low surface temperature of the oven.

Features
1.Adjustable dying speed 
2.Adjustable dying temperature
3.Heating up fast, forced-airconvection, High dying efficiency.
4.Fully sealed inside, temperature rise fast, good terperature uniformity.
5.Consistent heating of a high volume of products

Safety
1.Protection on ovens: All the components do meet international safety
stancard.
2.Over-temperature alarm. When the heating is out of control or exceeds the max. limit temperature,the heating is automatically cut off with sound and light alarm, ensure operating safe without any accident.

 

Product Parameters

Conveyor drying machine / Conveying tunnel drying Oven/ Tunnel dryer Oven

No.	Item	Specification
1	Electric Power	380V   50HZ   10KW
	Output power	about 4600W (Constant output power after temperature stabilization)
2	Size	Inner Size: W500mm*L1400mm*H50mm
		Outer Size: W800mm*L1200mm*H1020mm  (For reference )
3	Temp. range	3.1 Room Temp.+15ºC~200ºC  3.2 Heating Rising Time: about 20 mins from Room to 115ºC  ( empty testing)
4	Temp. uniformity	RT+15ºC to 200ºC	RT+15ºC to 300ºC
		±1.5%ºC	±2%ºC
5	Oven structure	5.1 Feeding Area 300mm, heating area 1400mm, discharging area 300mm, total 2000mm 5.2 Heating area divided into 2 parts, each part 700mm, with 2 sets of temperature controller 5.3 The height of feeding / discharging port : 50mm, adjustable 5.4 Conveying belt width 400mm 5.5 Upper cover of the heating part can be opened, easy for clean and maintain
6	Oven material	6.1 Inner material: using SUS stainless steel plate 6.2 Outer material: using SS41 cold-rolled sheet, baking after anti-static treatment, White color 6.3 Insulation layer: High-quality rock wool insulation cotton. 6.4 High-temperature resistance silicon sealing strip, environmental protection and no pollution
7	Temp. controller	6.1 Using XZ-960 controller, PID automatic calculation, SSR output, Temperature sensor, LED digital Setting & display 6.2 Overheat Protection Device XZ-480:Temperature is over the limit→ Fault Indicator Light & BZ alarm, then cut off the heating system automatically
8	Circulatory system	Horizontal Forced Hot Air Supply, special wind pathway design
9	Heating method	9.1 Method: Forced Hot Air Circulation + IR tube 9.2 IR tube installed on the top of machine, total 12 pcs
10	Conveying system	10.1 Conveying speed : 0-200mm/min, adjustable 10.2 Using the turbine reduction motor, with adjustable speed motor, frequency converter 10.3 Conveying belt: PTFE conveying belt, width 400mm 10.4 Height from ground to the conveying system surface: about 750±50mm 10.5 Conveying Direction: control panel oriented, from left to right
11	Safety device	Leakage circuit breaker, Over temperature alarm,motor overcurrent protection,machine abnormal buzzer warning,buzzer alarm, Three-color signal indicator,Emergency Stop Button, etc.
12	Warranty	1 year; If there is something wrong with the machine during working (any fault caused by non-artificial reasons), our company will provide the post-sale corresponding remote technical assistance lifelong.
13	Features	1.Special air duct design, good heating rate, high quality of baked products 2.Strong temperature stability and uniformity. 3.SSR output control, small temperature fluctuation 4.Fully equipped with safety protection facilities and high safety performance 5.Multi-layer heat insulation design, good sealing effect 6.Clean Design, suitable for the dust-free workshop
14	Installation	1.Flat ground, good ventilation 2.No strong vibration, no strong magnetic field around the machine 3.At least 600mm away from the wall to install the machine 4.No inflammable, explosive, corrosive substance and dust around the machine 5.Check the power and voltage before starting the machine
15	Remark	OEM & ODM are available.

Application
Widely used in precision baking, drying, tempering, preheating, shaping, and processing technology of electronics, motor, communication, electroplating, plastics, hardware, chemical industry, food, printing, pharmaceutical, PC board, powder, impregnation, spraying, glass, ceramics, wood, building materials, and other build materials, etc.

Recommended Products

To view more details, you can click product keywords...

 

 

 

Company Profile

 

C SAIL was established in 2005 in Chang'an Town, Dongguan City, we have been committed to the innovation and production of a variety of drying ovens and test equipment. With 20+ years of development and industry experience, and served 30+ industries. Annual output reaches 1500+ sets. Customers are located in 50+ countries. Provide 12 hours online after-sales technical support service, and arrive at customer's place in 5 working days.

Our main products: Drying ovens, vacuum ovens, Conveyor drying oven, Dust-free ovens, Positive and negative pressure solidifying furnaces, UV curing machine, Environmental test equipment, Automatic vacuum glue curing equipment, Temperature controller, Heater, Air filter, etc.

FAQ

Q: Are you trading company or manufacturer?
A: We are both manufacturer and trading company.
We have 20+ years' professional experience as an industrial drying equipment manufacturer. Our production factory covers area about 20000M2 and exports machines 1500+ sets per year.

Q: Is OEM or ODM service available?
A: Most of the products are available for OEM / ODM customization.

Q: How about your service ?
Pre-sales service:
24-hour online service for your consultation.
Help to choose the right model, as well as a series of services, personnel, suggestions.
Intermediate service:
Give you the best quotation with suitable & convenient payment terms and method.
Timely production and delivery, notify you in a timely manner.
After-sales service:
Technical training: equipment operation, daily maintenance and warranty, common fault diagnosis and troubleshooting
Regular tour service: discover problems in advance and eliminate equipment and human hidden dangers in time.
Technical guidance: additional valuable special services can be provided according to the needs of users.

Q: When will make delivery ?
A: Generally, the lead time for the stocked products is about 7~10 days, vary by models and production schedule. For those customized products, the manufacturing lead time is around 30~ 60 days.

Q: How about quality of the goods?
A: Since the establishment of our company, relying on the technology superiority, we aim at the domestic and international research & drying equipment market. We cooperate with a lot of big customers, such Panasonic, Threebond, Hisilicon, Gree, HUAWAEI etc. Welcome to our company and watch our plant production condition any time.

Q: Transportation
A: Transported by DHL, UPS, EMS, Fedex, Air freight, sea freight etc.