Csail Model Cts-11L-2-Cp High and Low Test Chamber Laboratory Instrument Thermal Shock Test Chamber

Product Description

Csail Model Cts-11L-2-Cp High and Low Test Chamber Laboratory Instrument Thermal Shock Test Chamber 

Product Description

The series of cold and thermal shock test chambers is divided into high and low-temperature zones and normal-temperature zones High temperatures could reach 180 degrees and low temperatures could reach negative 70 degrees. It is used to simulate product application scenarios in rapidly changing temperature environments. Evaluate the performance and reliability of the product under extreme temperature changes by alternating between high and low-temperature zones.
 

Humanized Design
1. Intelligent temperature controller.
2. Available in Chinese and English menus to meet different language needs.
3. Professional foot design, saving lab space and improving the use efficiency.
4. Energy-saving design, low surface temperature of the oven.

Features
1. Reasonable structural design, and rapid cooling rate.
2. The imported refrigeration system is internal with SUS#304 high temperature-resistant stainless steel.
3. Heating up fast, forced-air convection, High drying efficiency.
4. Fully sealed inside, temperature rises fast, good temperature uniformity.
5. Automatic Air exchange and cooling.

Safety
1. Protection on ovens: All the components meet international safety standards.
2. Over-temperature alarm. When the heating is out of control or exceeds the max. limit temperature, the heating is automatically cut off with sound and light alarm, ensure operating safe without any accident.

The two-box hot and cold(Thermal)shock test chamber is a necessary testing equipment for the metal, plastic, rubber, electronics, and other material industries. It is used to test the material structure or composite materials that can withstand the continuous environment of extremely high temperature and extremely low temperature in an instant. To such an extent, the chemical changes or physical damage caused by the thermal expansion and contraction of the sample can be detected in a short period of time.

Product Parameters

Thermal Shock Test Chamber  / Environmental test chamber

Model		CTS-11L-2-CP	CTS-49L-2-CP	CTS-80L-2-CP	CTS-120L-2-CP	CTS-216L-2-CP	CTS-1000L-2-CP
Chamber design
Volume	L	11	49	80	120	216	1000
Inner Size (cm)	W	32	40	50	60	60	100
	H	15	35	40	40	60	100
	D	23	35	40	50	60	100
Outer Size (cm)	W	105	133	143	153	153	295
	H	76	200	205	205	225	250
	D	158	182	187	197	207	201
Temperature test parameters
Temperature range		-70ºC - +180ºC
Temperature shock range - High temperature		+60ºC - +150ºC
Temperature shock range - Low temperature		-65ºC - -10ºC
Heating rate - Hot chamber		Normal temperature → +180ºC ≤30min
Cooling rate - Cold chamber		Normal temperature → -70ºC ≤60min
Shock test method		Two vertical chambers / Two horizontal chambers
Transform method		Vertical movement of the basket up and down / Move the basket horizontally left and right
Temperature fluctuation	ºC	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5
Temperature accuracy	ºC	2.0 ºC
Transform time	seconds	basket transformation time≤10s, Temperature transformation time≤300s
Equipment schematic diagram
Power supply and connections (based on actual configuration in use)
Power Supply		AC380V 50HZ
Max.current	A		36.5	39.5	53.2	68.4	100
Max.power	KW		24	26	35	45	65
Control method		PID+SCR
Temperature/humidity (use ambient)		A : air cooling(environmental temperature:5ºC-28ºC) W : water cooling(water temperature 10 ºC-28ºC,water pressure:0.25-0.4Mpa)
System components
Raw material	Shell material	Electrolytic board baking paint
	Chamber material	Stainless steel plate SUS#304
	Thermal insulation material	High-density polyurethane foam (+rock wool)
refrigeration system	Cooling method	(Air cooling  / Water cooling)
	Compressor	Wheel Vortex Compressor (COPELAND) / Semi Enclosed Compressor (Bitzers)
	Refrigerant	High-temperature machine:R404A(The ozone depletion index is 0);  Low-temperature machine:R23(The ozone depletion index is 0)
Heating system		Nickel chromium wire heater
Circulating fan		High-temperature exposure: free; Low-temperature exposure: Off frequency type;
Observation window		Vacuum window; Electric heating (automatic adjustment), anti-frosting and anti-condensation device
Temperature sensor		Platinum electric resistance PT100
Humidity sensor		Touch screen input + TFT color LCD display
Noise	dB(A)	≤75dB(A sound level)
Accessories		Two adjustable shelves ; Diameter 50mm test holes and rubber plugs; 4 Wheels; Horizontal support frame
Safety device		Overtemperature protection, compressor overpressure, overload protection, fan overload protection, leakage protection, etc

Application
The Thermal Shock Test Chamber is used to test the bearing extent of material structures and composite materials in an instant and continuous high-temperature and extremely low-temperature environment, which in the shortest time to test their thermal expansion and contraction caused by chemical change or physical harm.

Recommended Products

View more details, you can click product keywords....
 

Hot Air Oven	Non-dust oven	Vacuum oven
Conveying drying machine	Temperature and humidity test chamber	Thermal shock test chamber
Mechanical accessories	Electronic accessories	Others

 

 

 

 

Company Profile

 

C SAIL was established in 2005 in Chang'an Town, Dongguan City, we have been committed to the innovation and production of a variety of drying ovens and test equipment. With 20+ years of development and industry experience, and served 30+ industries. Annual output reaches 1500+ sets. Customers are located in 50+ countries. Provide 12 hours online after-sales technical support service, and arrive at customer's place in 5 working days.

Our main products: Drying ovens, vacuum ovens, Conveyor drying oven, Dust-free ovens, Positive and negative pressure solidifying furnaces, UV curing machine, Environmental test equipment, Automatic vacuum glue curing equipment, Temperature controller, Heater, Air filter, etc.

FAQ

Q: Are you trading company or manufacturer?
A: We are both manufacturer and trading company.
We have 20+ years' professional experience as an industrial drying equipment manufacturer. Our production factory covers area about 20000M2 and exports machines 1500+ sets per year.

Q: Is OEM or ODM service available?
A: Most of the products are available for OEM / ODM customization.

Q: How about your service ?
Pre-sales service:
24-hour online service for your consultation.
Help to choose the right model, as well as a series of services, personnel, suggestions.
Intermediate service:
Give you the best quotation with suitable & convenient payment terms and method.
Timely production and delivery, notify you in a timely manner.
After-sales service:
Technical training: equipment operation, daily maintenance and warranty, common fault diagnosis and troubleshooting
Regular tour service: discover problems in advance and eliminate equipment and human hidden dangers in time.
Technical guidance: additional valuable special services can be provided according to the needs of users.

Q: When will make delivery ?
A: Generally, the lead time for the stocked products is about 7~10 days, vary by models and production schedule. For those customized products, the manufacturing lead time is around 30~ 60 days.

Q: How about quality of the goods?
A: Since the establishment of our company, relying on the technology superiority, we aim at the domestic and international research & drying equipment market. We cooperate with a lot of big customers, such Panasonic, Threebond, Hisilicon, Gree, HUAWAEI etc. Welcome to our company and watch our plant production condition any time.

Q: Transportation
A: Transported by DHL, UPS, EMS, Fedex, Air freight, sea freight etc.